sae j429 Grade 8 Threaded Rod and bar
Sae j429 Grade 8 threaded rod is a kind of high strength and heat resistant threaded rod manufactured from medium carbon alloy steel 4140/4142 quenched and tempered alloy steel for high temperature or high pressure service, used by the plumbing and contracting trade in maintenance departments to secure pressure tanks, valves, and flanges. sae 429 grade 8 threaded rod we produce is fully threaded stud bolts used for High Strength Steel Bolts such as marine anchor bolt, mine steel anchor bolt, wind turbine anchor bolt.
Sae j429 Grade 8 threaded rod is a kind of inch-series steel Threaded Rods in sizes upto 1 1/2".
Sae j429 Grade 8 threaded rod we produce is manufactured with rolled threads instead of cut, free from tears or tool marks typically found in cut threads. So the threaded rods are smoother and have less surface imperfections that may cause possible failure in severe service applications.
1. sae j429 grade 8 threaded rods raw material sae4140 chemical composition:
C | SI | MN | S/P | CR | MO |
0.38-0.45 | 0.15-0.35 | 0.75-1.00 | 0.035(MAX) | 0.80-1.20 | 0.15-0.25 |
2. sae j429 grade 8 threaded rods mechanical property:
Tensile strength | Yield strength | Elongation | Reduction of area | Hardness |
1035MPa min | 900MPa min | 12% min | 35% min | 33 HRC - 39HRC |
Note: The properties can adjust according to your requirements
3. sae j429 grade 8 threaded rods sizes:
Imperial threaded rods: 1/2"- 4"
LENGTH: 1M, 2M ,3M, 6M, 12FT or cut to other lengths according to customer's requirement.
Imperial threaded rods common sizes:
5/8" | 11UNC |
3/4" | 10UNC |
7/8" | 9UNC |
1" | 8UN |
1 1/8" | 8UN |
1 1/4 | 8UN |
1 3/8" | 8UN |
1 1/2" | 8UN |
Product Categories : Threaded Rods > SAE J429 Threaded Rods
Subscribe To Our Newsletter:
Get Updates, Discounts, Special
Offers and Big Prizes!